Description

• View instant & average moisture values while harvesting from the FarmTRX Mobile App
• View average moisture values and wet & dry yield totals
• Determine weight and volume lost to moisture
• View & export moisture maps from the FarmTRX Web App

How it works: The FarmTRX Moisture Sensor measures the dielectric properties of grain flowing over it, which is directly related to the grain’s moisture content.

What’s Included: 

• Moisture Sensor
• Plug-and-Play Wiring Harness
• Plasma Cutting Template
• Mounting Hardware

Installation Option 1: Plasma Cutter – Time: 30 Minutes:
Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Clamp plasma cutter guide to door and cut hole for sensor face & mounting bolts. Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.

Installation Option 2: Hole Saw & Grinder – Time 1 hr +
Remove clean grain elevator lower door. Determine mounting location using supplied instructions. Tape drilling template to door, mark centre points for hole-saw & mounting bolt locations. Using 1 ¾” hole saw, drill two holes at marked positions from template. Cut the remaining triangular sections using the template and a zipblade on a grinder. Drill mounting bolt locations. Bolt moisture sensor to door, re-attach door to grain elevator, and plug wiring harness into Yield Monitor Interconnect Wiring Harness.